Electronic medical equipment check quality than usual progress

With the improvement of living standards, all kinds of home medical equipment product begins to be the people's extensive concern, which have electronic medical equipment is particularly conspicuous, its due to the particularity of the product by the welcome of people, but because of late starting technology and management still has many deficiencies, in recent years the inspection many products quality problems.

A recent national medical electronic equipment industry management association work conference, the association quality supervision and administration office pay director n.syed revealed in this year 2-3 month quality management office shall, jointly with the related departments check of 352 medical therapy electronic products, 67 the product is unqualified, will not percent of pass is 19.9%, compared to previous years medical equipment check results there has been a significant change.

At the same time according to the existing medical instrument off-specification problem, from now on, the national medical electronic equipment industry management association joint related departments in the nationwide expansion for the period of one year the comprehensive improvement of the quality and safety of action. N.syed introduction, this year result of sampling observation of quality of overall much improved, point also exist certain asked questions, compared with last year, electronic medical equipment medicine qualified rate increase was the largest, the check fully meet the provided with infrared intelligent check non-eyewinker, rui shi kang biological source decompression apparatus, thousand finger citron prostate therapeutic apparatus and 137 products, detection unqualified medical equipment 67 batches.

In the 19 high-risk medical device manufacturing enterprise for assault examination found that 16 existing problems of the enterprise has been ordered to suspend production rectification.

Article: from perlong medical (http://www.pl999.net)
Attention: if you want to copy this article , you must attach the website.

Seven questions on fluoroscopy x ray machine

Here are some fluoroscopy x ray machine points as follows:

General perspective of our discussion machines are basically refers to the x-ray machine, x-ray machines and can be divided into points of digital x-ray machines and non-digital x-ray machine.

X-ray machine uses made ​​of the X-ray machine principle, X-ray machines, the same used in the medical industry, for industry, exploration, metallurgical and other industries at the same time, it is the difference between the CT machine is that it is a flat X-ray scanning, CT machine stereoscopic tomography, CT fluoroscopy is a perspective tomography so large volume NATURAL, but it requires complex processing circuitry to the different angles of the X-ray picture processing establishment of the body, so it is impossible to achieve micro. X-ray machine just plane scanning, it can be miniature and portable.

We need to understand the seven characteristics of fluoroscopy

The fluoroscopy machine belongs to the high-end electronic products, the price of each of the parts are more expensive, are high-precision electronic components.

Perspective penetration depends on the perspective of different objects have different effects.

Perspective machine penetrating vision depends on, but can not be made to be regulated, because strong strong component pair, weak little weak components paired.

The perspective machine Penetration of the strength of the components of the price of the same.

The each demand perspective objects are not the same, of course fluoroscopy price are not the same.

The each demand perspective effect requirements are not the same.

Seventh, each demand requirements supporting the medical equipment is not the same connection type, wireless type, have not been treated to see the effect diagram, see treated effect diagram.

Article : From Perlong medical (http://www.pl999.net/)

Attention:If you want to copy, please attach the website.

The primary hospital medical equipments with broad primary market prospects need to be urgently upgrading

The medical device industry is developing rapidly, and China has become the world's fourth largest medical device market. But turned to the primary market, many medical institutions, medical equipment are in the low-end level, which is also on the world there is no shortage of the mid-1980s the previous products. With national attention on the construction of rural medical career, our primary hospital medical equipment facing the fate of "upgrading" the process will be a demand for the release process, the future prospects for the development of the market at the grassroots level will also be very impressive.

 The total output value of China's medical equipment industry has maintained rapid growth since the 1990s, the average rate of increase has been maintained at a level of 12% -15%. With the deepening of reform and opening up, the national support efforts to continue to increase as well as the acceleration of the process of globalization, China's medical device industry is rapid development.

 Experienced a cold snap of the economic crisis and weak demand in 2010, China's medical equipment industry finally ushered in the large export growth situation. On the basis of over ten billion dollars in the first half of the import and export of medical devices total import and export trade in the second half of the year continued to show growth, the annual import and export volume exceeded $ 20 billion mark for the first time. In 2011, the development momentum of China's medical equipment import and export trade continued to improve, and improved medical equipment import and export trade imbalance: annual imports and exports amounted to 26.598 billion U.S. dollars, a year-on-year growth of 54.43%.

 The new health care reform made ​​it clear that the state will gradually increase the public health system and urban communities, rural primary health building. With the medical device companies to further dig deep the countryside + Community market, as well as continue the trend of structural adjustment and industrial upgrading, the medical device industry has entered a phase of rapid development.

 In the next few years, two, three lines of the county, township of grassroots medical institutions will be the top priority of the Chinese medical equipment  market, including the economically backward areas of the Midwest such as is also the focus of future development. With the growth of consumer strength in these areas after the national health care reform put increasing vast counties of room for growth.

Article : From Perlong medical (http://www.pl999.net/)

Attention:If you want to copy, please attach the website.

The principle of chemiluminescence microplate

Chemiluminescence microplate reader principle introduced on the the Perlong medical devices network is as follows:

Microplate chemical luminescence is accompanied by a phenomenon of optical radiation in the substance during the chemical reaction process, can be divided into the direct light and indirect light. The direct light is the most simple chemiluminescent reaction, there are two key steps: i.e. excitation and radiation. As A, B two substances, chemical reaction occurs to generate C substance, the release of energy for the reaction is absorbed by the molecules of the substance C and transitions to the excited states C * is in the excitation of C * in the process back to the ground state to generate optical radiation. Where C * is the luminous body, this process due to C directly involved in the reaction, it is called direct chemiluminescence.

Indirect light emitting of the medical device of the reader, also known as the energy transfer chemiluminescent, it mainly consists of three steps: First reaction the reaction of A and B to generate excited state intermediate C * (energy donor); release when the C * decomposition energy transfer to F (energy acceptor), to make the transition to the excited state F * F are excited; Finally, when the F * transition back to the ground state, emit light.

A microplate reader chemical reactions to produce chemiluminescence phenomenon, the following conditions must be met:

The first is the reaction must provide sufficient excitation energy, by a step provided separately, because of the energy released by the first reaction step will disappear due to vibrational relaxation but can not emit light in solution;

The second is the least have a favorable reaction process, so that the energy of a chemical reaction can be a substance acceptable and to generate excited state;

The third is the excited state molecule must have a certain chemical luminescence quantum efficiency to release photons, or be able to transfer its energy to another molecule to make it into the excited state, and the release of photons.

Microplate chemiluminescence determination of substances can be divided into three categories:

The first class of material is the reactant in the chemiluminescent reaction;

The second type substance is a chemiluminescent reaction of the catalyst, a sensitizer or inhibitors;

III substances is the coupling reaction of the reactants, catalyst, the sensitizing agent.

These three substances can also be used to determine by marking by other substances, further expanding the scope of application of the chemiluminescent analysis.

Microplate chemiluminescence reaction of the light-emitting type flash (flash type) and is usually divided into two glow (glow type). Flash light-emitting time is very short, only a fraction of a second to a few seconds. Glow type, also known the luminous time from a few minutes to tens of minutes or hours to longer. Flash samples must be measured immediately, and must be accompanied by a fully automated pipetting and measurement elisa reader. Glow samples can be measured using a general-purpose instrument can also be equipped with a fully automated instrument.

Article : From Perlong medical (http://www.pl999.net/)

Attention:If you want to copy, please attach the website.

Price of perspective ,medical x ray manufacturers

Generally speaking perspective machine is refers to the X-ray machine, perspective machine principle x ray is a kind of invisible light, in principle, he and infrared, ultraviolet, microwave equivalent belongs to the spectrum in dispersion, and their different lengths, collectively referred to as optical spectrum. Is through the prism scatter color get different frequencies of light. Light also can be divided into visible and invisible light. Visible light is our daily life to see all sorts of color is light, invisible light such as TV remote infrared, the sun ultraviolet ray, the microwave microwave oven, medical X-ray machine use X-ray apparatus principle.
In the perspective machine manufacturer home, she medical X-ray machine perspective machine PLX2200, the characteristics of shown below:

1, high quality combined high frequency high voltage X-ray generator, no high voltage cable design, reducing wear and tear, ray quality good, image is clear with pulse perspective.
2, the human body graphics SPC liquid crystal type touch screen control design, the operation is more intelligent, more convenient.

3, hand brake and the foot brake two kinds of control mode, flexible switch, convenient application.
4, dynamic image limit resolution 2.0 LP/mm.
5, has the perspective KV/MA automatic tracking function, make the image brightness, resolution is always in the best state.
6, high quality intensifier, high-definition low illumination CCD, non-interlaced output central control system, progressive scan display device, match

(perspective machine manufacturers - perlong medical -- Fluoroscopy units PLX2200)

PLX2200 is one of the high ratio of a new medical X-ray instrument , widely used in human esophageal, chest, gastrointestinal, abdomen, limb parts such as continuous fluoroscopic diagnosis, high market share.

- this kind of perspective machine price quotation ?
- you can directly dial web top of the free customer service hotline: 400-6656-888 consultation to understand.

Article: from perlong medical (http://www.pl999.net)
Attention: if you want to copy this article , you must attach the website.

Medical equipment market of illegal medical practice, the effective purification medical equipment order

Medical equipment market existing illegal medical behavior to the health of the people, caused certain threat, such behavior in order to strengthen the regulation blow, China's many cities are constantly increase law enforcement efforts, and regulation has achieved remarkable success. As we have learned, LiQuanXian taken many measures applied, combination with "three three check SanJin three solution" theme development "catch style optimal environment promoting development" and "merit YiManYi" activities, crack down on medical equipment market illegal medical behavior, the effective purification in the county YiXie market order.

According to the report, the LiQuanXian check medical institutions 397, banning illegal medical 3 door, confiscated drugs and box, medical equipment and parts, a fine of 40000 yuan, demolition of illegal medical advertisement 11, accept masses on three charges.

Designation professional technicians to the township health center rotation ZuoZhen 40 people, to carry out medical technology lectures four times, support equipment more than 10 Taiwan, optimize medical environment, improve the quality of medical treatment service purpose. On this basis, LiQuan from optimization service principle of archives, the implementation of the cover of the new rural cooperative medical care, aged 65 years and over the elderly health physical examination, the maternal free hospital delivery project, mother health engineering, children's planned immunity, infectious disease management and so on a number of basic health care projects, through the county community health service center (station), rural hospitals, village clinic and urban and rural base layer medical institutions provide free for all residents, effectively improve the nation's health care consciousness, from start early prevention, the disease nipped in the bud. To realize the goal of everyone go to a doctor is guaranteed.

Article: from perlong medical (http://www.pl999.net)
Attention: if you want to copy this article , you must attach the website.

Tips of Domestic Medical Equipment Sales

In recent years, because of rapid development ofChina's medical equipment industry, many manufacturers mushroomed up. But taking a share is not an easy task in the environment of the medical reform. At present the majority of manufacturerme are using the traditional medical equipment sales, the manufacturer of the equipment sold to hospitals integrate resources of agents, its drawback is that (to go through the department director, Equipment Division, vice president of the hospital into a single-cycle long, tender and other sectors), high costs, fierce competition, low profit margins, there are many drawbacks of this way of selling, there are many of the medical equipment market place NA. What are the common effect of a good way of selling it?

 1. Cooperation divided into. Some hospital procurement of medical equipment, but the moment can not even pay for, take the form of cooperation into the medical equipment vendors, such as 50 million of equipment, the hospital first pay $ 100,000, then shared equally, when the amount of suppliers into reached 40 million, the contract is terminated, and equipment owned by the hospital all.

This sales approach is conducive to avoid vicious competition, without bidding, the drawback is that risk, financial pressure, and suppliers to sign such a contract is very cautious, usually the contract price is the selling price of 2.5 times, and the suppliers up and down and hospitals have good relationship. Most importantly, there is no change in the life of the contract, the hospital senior staff.

Medical items packaged. After 2005, with the medical equipment sales increasing competition, some hospitals for rating or a new building completed, you need to purchase a batch of equipment. Some medical equipment dealers transformation test the water "medical items packaged together, the department needs the equipment packaged and sold to the hospital.

This way of selling on the bargaining power of hospitals, turnover, some hospitals are more willing to accept the simple, efficient mode. Dealers do "medical items packaged in Beijing, Shanghai, Jiangsu, Anhui and other places, has been formed.

 3. Equipment leasing. With the development of medical science and biological engineering technology, hospital surge in demand for high-end medical equipment, such as MRI, CT, PET, Gamma Knife and other high-tech imaging equipment and radiation therapy equipment, but these devices often require several million dollars , even thousands of yuan funds. The hospital is the moment to take so much money, how to do? Introduction of financial leasing companies.

 It is a way of selling a win-win situation. Abroad, the finance lease is already very mature, and a wide range of financial instruments, but many domestic users, especially in hospitals, is still relatively fresh things. Currently, nearly 1/3 of the global investment in finance leases completed with the banking, insurance, trust, securities tied for the top five financial pillar. It is reported that in 2003 the global leasing total of $ 461.6 billion, the United States, Japan, Germany, respectively, at $ 204 billion, $ 62.1 billion, $ 38.8 billion in the first three, the lease amounted to only $ 2.2 billion.

 Medical equipment investment. Medical device investment is different from the cooperation into, the difference is that the cooperation divided into still stay in the level of selling equipment, medical equipment investment is integration, complete, comprehensive solutions. It not only provides medical training, and product maintenance and other support services, in order to better realize the value of the product, faster, and will also provide marketing, project management, promotional marketing and other related services, so that customers do not have to worry about when the operators of the new project.
Above several medical device sales methods have their own advantages and shortcomings, according to the specific circumstances, to choose the right way of selling. Only the right, is the best.

Article : From Perlong medical (http://www.pl999.net/)

Attention:If you want to copy, please attach the website.