Why to say platelet is one of the most important blood analyzer test project?

Why to say platelet is one of the most important blood analyzer test project? The following appeared blood analyzer, blood analyzer are refers to the blood analyzer, belong to the same kind of medical apparatus and instruments.

Blood analyzer platelet area has four parameters: platelet (PLT), platelet press (PCT), mean platelet volume (MPV) and platelet volume distribution width (PDW) report on the PLT height is obvious, but in some diseases PLT and platelet volume closely, analysis the relationship between the two very important PLT decrease and MP V increases, in no clinical symptoms and signs of acute myocarditis artery, cardiac hypertrophic osteoarthropathy, extracorporeal circulation when immune thrombocytopenic purple paralysis, diabetes and coronary heart disease patients increased PLT and MPV normal, in myeloid proliferative diseases, reactive platelet hyperplasia and large area inflammatory reaction, infection, cancer and other relevant PLT and MPV decreased, in dysplastic anemia, HIV/AIDS, spleen function hyperfunction, bone marrow fiber, tumor infiltration, pure megakaryocyte dysplasia, aplastic anemia, sepsis, megaloblastic anemia PLT and MPV are increased, in reactive thrombocytosis and iron deficiency anemia MPV value increase, PLT normal, in chronic myelogenous leukemia, myelofibrosis, splenectomy, leukemia chemotherapy patients MPV value drop before PLT decline when primary thrombocytopenia MPV value maximum, when alleviate PLT when rise, MPV is reduced, PLT of normal, MPV also normal.

Abnormal platelet platelet and red blood cells in the same channels in measurement, both in volume has obvious difference, blood analyzer set a specific stop value, will be higher than stop value as the red blood cells, and platelets but for red blood cell group the small red blood cells or cell debris can fall in platelet stop value inside, huge platelet or gathered platelet can be mistaken for red blood cells, these all can from platelet histogram reflected in additional, chyle particles, cold globulin particles and erythrocyte condensing set and so on also can disturb the PLT results, but platelet histogram no obvious change.

Small platelets in the blood analyzer the curve peak right ci left, in less than 20 fl at some point and x axis coincidence, MPV value significantly reduce if PLT decrease, visible at the AIDS virus infection and spleen hyperfunction etc; If PLT normal, seen in chronic aplastic anemia; If PLT increases, seen in reactive thrombocytosis disorder.

Big platelets in the blood cell analyzer the curve peak right right shift, in more than 30 fI at some point and x axis coincidence, MIPV value significantly higher if the platelet count reduction, seen in idiopathic thrombocytopenic purple paralysis and extracorporeal circulation; If the platelet count increases, in after splenectomy if platelet count is normal, seen in chronic myelogenous leukemia, bone marrow fibrosis and other uneven size platelet, mainly platelet histogram display curve peak right shift and bottom up.

Gather the platelet curve peak become low, if to less than 20 platelet aggregation is given priority to, curve peak right up in tow caudate, not with x axis coincidence, If to more than 20 platelet aggregation is given priority to, the curve peak become low, flat, and the right side up is not obvious at this time, in the leucocyte histogram 35 fL place has a small peak, specimen collection is improper or ethylenediamine tetraacetic acid dependence platelet aggregation, etc.

To sum up, although blood analyzer for disease diagnosis, differential diagnosis and curative effect observation offers a number of important basis, but still can't replace microscopy, only as microscopy screening, and should combine blood analyzer of other parameters comprehensive analysis, meet instrument issued a warning signal, must, in accordance with international hematology review panel recommended article 41 review rules inspected.

Article : From Perlong medical (http://www.pl999.net/)
Attention:If you want to copy, please attach the website.

The automatic animal blood cell analyzer manufacturers

Animal blood cell analyzer is widely used in pet hospital, animal quarantine department, animal husbandry and veterinary hospitals, zoos, research institutions Experiment Center and others. Analyzer and the blood cells of humans, but also semi-automatic animal blood cell analyzer and automatic animal blood cells analyzer.

Blood cell analyzer manufacturer of promotional products, will be introduced for the human blood cell analyzer can also be used for animals, In fact, the structure of the blood of animals and humans is different, with the same instrument detection will the resulting detection results are not accurate. So they still need to purchase specialized blood cell analyzer for animals.

Purchase animal blood cells Analyzer requires attention to consider these points: whether it is fully automatic animal blood cell analyzer; purchase of automated blood cell analyzer operation is simplicity; consider buying instruments pore blocking rate will not be too high.

The Perlong medical as the automatic animal blood cell analyzer manufacturers representatives, it produces XFA6030 type animal blood cell analyzer and XFA6130 animal blood cell analyzer with full automation capabilities. We XFA6030 type represented by the advantage it has introduced:

Time count and advanced waveform analysis technology with high-speed data acquisition and powerful data at

Management system to ensure accurate and effective measurement.

The mature stable pipeline design combined with advanced the sweep flow technology, to ensure that the system is stable and reliable.

The high-voltage solar eclipse and unique positive pressure recoil technology, and pore blocking probability is reduced to a minimum.

Etc. and wanted to know more details about this automatic animal blood cell analyzer advantage of the characteristics of a friend, can understand online customer service consulting side of the page, or directly dial the toll-free hotline :400 -6656-888 consulting understood.

Article : From Perlong medical (http://www.pl999.net/)

Attention:If you want to copy, please attach the website.

Primary hospital staff should strengthen knowledge training, not let the medical devices "sleep"

With the implementation of the national emphasis on medical industry, and newmedical reform, China's grass-roots' health has been a certain degree of protection. For the primary health care sector have made significant progress in recent years in the purchase of medical equipment, but for various reasons, some large hospitals medical devices almost "asleep". It is reported that China International Medical Exchange Foundation work before Siemens Medical health China - held in Beijing to re-take the Long Way, concerned about the primary health care activities, members Shiming Guo said: "The grassroots needs not only high-quality equipment, need more skilled to operate the equipment, and accurate read-chip diagnostic professionals. "the big speech precisely that common phenomenon in today's grassroots medical institutions. Therefore, in order to wake up the sleeping equipment and facilities, the primary health care sector should also increase staff training.

Imaging Technology Branch of the Chinese Medical Association showed that the findings of the 13 provinces (autonomous regions and municipalities), with relatively low education of medical imaging professionals, practitioners of master's degree or above accounted for only 0.54%. At the same time, of grassroots medical equipment about software features "sleep" in no one would use in an embarrassing situation. Doses of radiation protection knowledge "Some primary care doctors do not know much about the others is the use of improper methods. Example, 64-slice CT as a single-row CT use, resulting in a waste of resources." Feng Xiaoyuan said, the chairman of the Chinese Society of Radiology credits, training on the one hand to play the grassroots medical equipment use efficiency, on the other hand is to enhance the level of quality control and management of the equipment.

According to reports, the "re-take the Long Way" physician training programs covering various fields of radiology, ultrasound examination and hospital equipment maintenance. Activities starting from Ruijin City, Jiangxi Province, passing through when the Red Army came in 11 provinces from 2012 to 2015, will be equipped with medical imaging equipment and clinical diagnostic clinics cars as the carrier, to carry out the training and education of primary care doctors and hospital long forum. I hope that through such activities, can effectively help primary hospital staff technical capacity and professional level.

Article : From Perlong medical (http://www.pl999.net/)

Attention:If you want to copy, please attach the website.

Where are the improve performance of Blood analyzer holes tube technology ?

Blood analyzer holes tube technology improvement in performance and flow technology improvement and counter-attack flow device improvement and water power focus on technology improvement, the concrete content shown below:

Pore pipe is blood analyzer for counting the key components, early blood cell analyzer medical equipment generally only a diameter for 100 μ holes pipe, use gem after laser precision punching, and then again Mosaic glass support. Now most of the resistance method instrument holes tube in the leucocyte detection use diameter for 100 μ holes tube, in red blood cell and platelet detection use diameter is 60 ~ 80 μ holes tube, materials have gem and special ceramics constitute. For example the classical COULTER external holes tube, and when something plugging holes available brush cleaning or direct tear open come down to clean. Early holes pipe generally exposed to the outside, its main purpose is to facilitate manual cleaning, more for single tube way, carries on the white blood cells to red blood cell count conversion when had better cleaning. Later development for the red and white blood cells of two independent exposed holes tube, generally 20 seconds can also complete the red and white blood cells of the count, need to artificial use pipette or quantitative straw from leucocyte dilution suspension in the red blood cells of the secondary dilution or supporting the use of the dilution device. The blood cell analyzer holes usually use built-in, reduce the pollution of the opportunity and also provides automatic cleaning function, make every time counting can provide automatic flushing, reduce the cross contamination opportunities at the same time counting speed also have greatly improved.

In order to more accurate to the cell count and prevent all kinds of interference occurs, the medical instrument company in the design and improvement of small tube used on different treatment scheme. These technical powerful guarantee blood cell analyzer accurate, especially the accuracy of platelet count.

First, sweep flow technology: to reduce already through the count holes due to fluid backflow and re-entry count area caused by repeat count, in the hole behind add a sweep flow fluid system, will count the cell through the sweep flow liquid rushed into the waste pipe.

Second, counter-attack flow device: to prevent cell to return to count sensitive area, in the hole behind add a perforated when plate, with negative pressure will have been counting the cell block directly after waste collected in the pipe.

Third, water power focusing technology: that is the most effective method, also called sheath flow technology. It is through the use of fluid dynamic principle, can ensure that cells in the sheath liquid center side by side in a column by detecting hole center or through the laser beam center, and ensure that it will not return to sensitive area, at present a lot of more advanced blood analyzer generally USES this technology.

Article : From Perlong medical (http://www.pl999.net/)
Attention:If you want to copy, please attach the website.

Electronic medical equipment check quality than usual progress

With the improvement of living standards, all kinds of home medical equipment product begins to be the people's extensive concern, which have electronic medical equipment is particularly conspicuous, its due to the particularity of the product by the welcome of people, but because of late starting technology and management still has many deficiencies, in recent years the inspection many products quality problems.

A recent national medical electronic equipment industry management association work conference, the association quality supervision and administration office pay director n.syed revealed in this year 2-3 month quality management office shall, jointly with the related departments check of 352 medical therapy electronic products, 67 the product is unqualified, will not percent of pass is 19.9%, compared to previous years medical equipment check results there has been a significant change.

At the same time according to the existing medical instrument off-specification problem, from now on, the national medical electronic equipment industry management association joint related departments in the nationwide expansion for the period of one year the comprehensive improvement of the quality and safety of action. N.syed introduction, this year result of sampling observation of quality of overall much improved, point also exist certain asked questions, compared with last year, electronic medical equipment medicine qualified rate increase was the largest, the check fully meet the provided with infrared intelligent check non-eyewinker, rui shi kang biological source decompression apparatus, thousand finger citron prostate therapeutic apparatus and 137 products, detection unqualified medical equipment 67 batches.

In the 19 high-risk medical device manufacturing enterprise for assault examination found that 16 existing problems of the enterprise has been ordered to suspend production rectification.

Article: from perlong medical (http://www.pl999.net)
Attention: if you want to copy this article , you must attach the website.

Seven questions on fluoroscopy x ray machine

Here are some fluoroscopy x ray machine points as follows:

General perspective of our discussion machines are basically refers to the x-ray machine, x-ray machines and can be divided into points of digital x-ray machines and non-digital x-ray machine.

X-ray machine uses made ​​of the X-ray machine principle, X-ray machines, the same used in the medical industry, for industry, exploration, metallurgical and other industries at the same time, it is the difference between the CT machine is that it is a flat X-ray scanning, CT machine stereoscopic tomography, CT fluoroscopy is a perspective tomography so large volume NATURAL, but it requires complex processing circuitry to the different angles of the X-ray picture processing establishment of the body, so it is impossible to achieve micro. X-ray machine just plane scanning, it can be miniature and portable.

We need to understand the seven characteristics of fluoroscopy

The fluoroscopy machine belongs to the high-end electronic products, the price of each of the parts are more expensive, are high-precision electronic components.

Perspective penetration depends on the perspective of different objects have different effects.

Perspective machine penetrating vision depends on, but can not be made to be regulated, because strong strong component pair, weak little weak components paired.

The perspective machine Penetration of the strength of the components of the price of the same.

The each demand perspective objects are not the same, of course fluoroscopy price are not the same.

The each demand perspective effect requirements are not the same.

Seventh, each demand requirements supporting the medical equipment is not the same connection type, wireless type, have not been treated to see the effect diagram, see treated effect diagram.

Article : From Perlong medical (http://www.pl999.net/)

Attention:If you want to copy, please attach the website.

The primary hospital medical equipments with broad primary market prospects need to be urgently upgrading

The medical device industry is developing rapidly, and China has become the world's fourth largest medical device market. But turned to the primary market, many medical institutions, medical equipment are in the low-end level, which is also on the world there is no shortage of the mid-1980s the previous products. With national attention on the construction of rural medical career, our primary hospital medical equipment facing the fate of "upgrading" the process will be a demand for the release process, the future prospects for the development of the market at the grassroots level will also be very impressive.

 The total output value of China's medical equipment industry has maintained rapid growth since the 1990s, the average rate of increase has been maintained at a level of 12% -15%. With the deepening of reform and opening up, the national support efforts to continue to increase as well as the acceleration of the process of globalization, China's medical device industry is rapid development.

 Experienced a cold snap of the economic crisis and weak demand in 2010, China's medical equipment industry finally ushered in the large export growth situation. On the basis of over ten billion dollars in the first half of the import and export of medical devices total import and export trade in the second half of the year continued to show growth, the annual import and export volume exceeded $ 20 billion mark for the first time. In 2011, the development momentum of China's medical equipment import and export trade continued to improve, and improved medical equipment import and export trade imbalance: annual imports and exports amounted to 26.598 billion U.S. dollars, a year-on-year growth of 54.43%.

 The new health care reform made ​​it clear that the state will gradually increase the public health system and urban communities, rural primary health building. With the medical device companies to further dig deep the countryside + Community market, as well as continue the trend of structural adjustment and industrial upgrading, the medical device industry has entered a phase of rapid development.

 In the next few years, two, three lines of the county, township of grassroots medical institutions will be the top priority of the Chinese medical equipment  market, including the economically backward areas of the Midwest such as is also the focus of future development. With the growth of consumer strength in these areas after the national health care reform put increasing vast counties of room for growth.

Article : From Perlong medical (http://www.pl999.net/)

Attention:If you want to copy, please attach the website.